Cabinet Construction
- Standard model features powder-coated door, front, and sides. Interior has 304 stainless steel on door liner, top, bottom, back and sides.
Racking
- Racking available to stack units.
Doors
- Positive magnetic seal, reversible.
Insulation
- Entire cabinet structure and doors insulated using 2″ urethane foam.
Shelving
- 2 stainless steel wire shelves are standard. Shelves capable of supporting up to 150 lbs of evenly distributed weight.
- Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of stainless steel. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
Cooling System
- Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable, and provides minimal vibration.
- Semi-Redundant cooling capability.
- Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH
Electrical Characteristics
- Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet.
- A cord and plug set is included.
- A sole use circuit is recommended.
Cabinet Construction
- Stainless model has stainless steel front door, and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes LED interior lighting.
- Standard model features stainless door, front, and brushed aluminum sides. Interior has coated aluminum side walls, door liner,and back with stainless steel floor and ceiling.
Doors
- Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,”Low-E” glass.
Insulation
- Entire cabinet structure and doors insulated using foamed-in-place CFC-free polyurethane foam.
Shelving
- Wire shelves (3 per door) available in stainless steel or PVC coated. Shelves capable of supporting up to 200 lbs. Gray PVC coated shelves are standard.
- Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
Cooling System
- Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable, and provides minimal vibration.
- Semi-Redundant cooling capability
- Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH
Electrical Characteristics
- Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 4.6 RLA under test conditions.
- A cord and plug set is included.
- A sole use circuit is recommended.
Emergency Shut Down
- Unit is supplied with shut down capability upon attaining set temperature.
- Prevents runaway temperature from unintended eradication. Can be bypassed for intended decontamination.
Cabinet Construction
- Standard model features powder-coated door, front, and sides. Interior has 304 stainless steel on door liner, top, bottom, back and sides. Exterior is galvanized heavy-duty steel or alumnum construction for long term corrosion free appearance. Changes to color possible with optional upgrade. Heavy-duty casters included as standard.
- Optional model availability to change construction materials to aluminum or higher end grades of stainless steel available.
Doors
- Positive magnetic seal. Reversible.
Insulation
- Entire cabinet structure and doors insulated using 2″ urethane foam.
Shelving
- 3 stainless steel wire shelves are standard. Shelves capable of supporting up to 150 lbs of evenly distributed weight.
- Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of stainless steel. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
Emergency Shutdown
- Unit is supplied with shut down capability upon attaining set temperature • Prevents runaway temperature from unintended eradication. Can be bypassed for intended decontamination.
Cooling System
- Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable, and provides minimal vibration.
- Semi-Redundant cooling capability.
- Cooling surfaces can be made to act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH.
Electrical Characteristics
- Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet.
- A cord and plug set is included.
- A sole use circuit is recommended.
Cabinet Construction
- Stainless model has stainless steel front doors and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes LED interior lighting.
- Standard model features stainless door, front, and brushed aluminum sides. Interior has aluminum side walls (looks like stainless steel), door liner, and back with stainless steel floor and ceiling.
Doors
- Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,”Low-E” glass.
Insulation
- Entire cabinet structure and doors insulated using foamed-in-place CFC-free polyurethane foam.
Shelving
- Wire shelves (3 per door) available in stainless steel or PVC coated. Shelves capable of supporting up to 150 lbs. Gray PVC coated shelves are standard.
- Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
Cooling System
- Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable, and provides minimal vibration.
- Semi-Redundant cooling capability.
- Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH.
Electrical Characteristics
- Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 6RLA under test conditions.
- A cord and plug set is included.
- A sole use circuit is recommended.
Cabinet Construction
- Stainless model has stainless steel front doors and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes interior lighting.
- Standard model features stainless door, front, and brushed aluminum sides. Interior has aluminum side walls, door liner,and back with stainless steel floor and ceiling.
Doors
- Lifetime guaranteed adjustable torsion type closure system with aluminum and stainless supports. The face of each fitted with a 12″ long recessed handle with sheet metal interlock. Handles foamed in place to insure permanent attachment. Door gasket of one piece construction. Glass door models feature double pane,”Low-E” glass. Barrel lock standard for each door. Locks keyed alike.
Lighting
- LED interior lighting on stainless model, optional on standard model. Lights activiated by rocker switch mounted above doors.
Insulation
- Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.
Shelving
- Wire shelves (3 per door) available in stainless steel, chrome plate, or PVC coated. Shelves capable of supporting up to 200 lbs. PVC coated shelves are standard.
- Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
Cooling System
- Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable, and provides minimal vibration.
- Semi-Redundant cooling capability.
- Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH.
Electrical Characteristics
- Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 7 RLA under test conditions.
- A cord and plug set is included.
- A sole use circuit is recommended.
Cabinet Construction
- Standard model features powder-coated door, front, and sides. Interior has 304 stainless steel on door liner, top, bottom, back and sides.
Racking
- Racking available to stack units.
Doors
- Positive magnetic seal, reversible.
Insulation
- Entire cabinet structure and doors insulated using 2″ urethane foam.
Shelving
- 2 stainless steel wire shelves included. Shelves capable of supporting up to 150 lbs of evenly distributed weight.
- Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of stainless steel. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
Cooling System
- Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable, and provides minimal vibration.
- Semi-Redundant cooling capability.
- Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH
Humidity Control
- NIST traceable 0.8% Rotronic humidity sensor w/cert. Solid state controlled, ultrasonic humidifier with ceramic/titanium disk for long life.
Electrical Characteristics
- Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. A cord and plug set is included.
- A sole use circuit is recommended.
Cabinet Construction
- Stainless model has stainless steel front door, and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes LED interior lighting.
- Standard model features stainless steel door, stainless steel front, and brushed aluminum sides. Interior has anodized aluminum side walls, door liner,and back with stainless steel floor and ceiling.
Doors
- Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,”Low-E” glass.
Insulation
- Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam. 2″ or greater insulation thickness throughout.
Cooling System
- Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable. Semi-Redundant cooling capability. Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH
Shelving
- Wire shelves (3 per door) available in stanless steel, chrome plate, or PVC coated. Shelves capable of supporting up to 150 lbs of evenly distributed weight. Gray PVC coated shelves are standard.
- Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
Humidity Control
- NIST traceable 0.8% Rotronic humidity sensor w/cert. • Solid state controlled, ultrasonic humidifier with ceramic/titanium disk for long life.
Electrical Characteristics
- Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 outlet. A dedicated outlet is recommended. A cord and plug set to be included.
- A sole use circuit is recommended. Unit uses approximately 4.5 amps (RLA) in operation (will vary depending on set points and ambient conditions).
Cabinet Construction
- Stainless model has stainless steel front door, and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes LED interior lighting.
- Standard model features stainless steel door, stainless steel front, and brushed aluminum sides. Interior has anodized aluminum side walls, door liner,and back with stainless steel floor and ceiling.
Doors
- Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,”Low-E” glass.
Insulation
- Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.
Shelving
- Wire shelves (3 per door) available in stainless steel or PVC coated. Shelves capable of supporting up to 150 lbs of evenly distributed weight. Gray PVC coated shelves are standard.
- Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
Cooling System
- Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable, and provides minimal vibration.
- Semi-Redundant cooling capability.
- Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH
Humidity Control
- NIST traceable 0.8% Rotronic humidity sensor w/cert. Solid state controlled, ultrasonic humidifier with ceramic/titanium disk for long life.
Electrical Characteristics
- Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 6RLA under test conditions. A cord and plug set is included.
- A sole use circuit is recommended.
Cabinet Construction
- Stainless model has stainless steel front door, and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes LED interior lighting.
- Standard model features stainless steel door, stainless steel front, and brushed aluminum sides. Interior has anodized aluminum side walls, door liner,and back with stainless steel floor and ceiling.
Doors
- Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,”Low-E” glass.
Insulation
- Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam. 2″ or greater insulation thickness throughout.
Shelving
- Wire shelves (3 per door) available in stanless steel, chrome plate, or PVC coated. Shelves capable of supporting up to 150 lbs of evenly distributed weight. Gray PVC coated shelves are standard.
- Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
Cooling System
- Top mounted, thermoelectric cooling system.
- Peltier based technology is solid state, highly efficient, reliable. Semi-Redundant cooling capability.
- Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH.
Humidity Control
- NIST traceable 0.8% Rotronic humidity sensor w/cert.
- Solid state controlled, ultrasonic humidifier with ceramic/titanium disk for long life.
Electrical Characteristics
- Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 outlet. A dedicated outlet is recommended. A cord and plug set to be included.
- A sole use circuit is recommended. Unit uses approximately 9.5 amps (RLA) in operation (will vary depending on set points and ambient conditions).
All photos copyright to their respective owners.