Products

PH030

PH030 Image

Cabinet Construction

  • Stainless model has stainless steel front door, and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes LED interior lighting.
  • Standard model features stainless steel door, stainless steel front, and brushed aluminum sides. Interior has anodized aluminum side walls, door liner,and back with stainless steel floor and ceiling.

Doors

  • Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,”Low-E” glass.

Insulation

  • Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam. 2″ or greater insulation thickness throughout.

Cooling System

  • Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable. Semi-Redundant cooling capability. Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH

Shelving

  • Wire shelves (3 per door) available in stanless steel, chrome plate, or PVC coated. Shelves capable of supporting up to 150 lbs of evenly distributed weight. Gray PVC coated shelves are standard.
  • Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Humidity Control

  • NIST traceable 0.8% Rotronic humidity sensor w/cert. • Solid state controlled, ultrasonic humidifier with ceramic/titanium disk for long life.

Electrical Characteristics

  • Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 outlet. A dedicated outlet is recommended. A cord and plug set to be included.
  • A sole use circuit is recommended. Unit uses approximately 4.5 amps (RLA) in operation (will vary depending on set points and ambient conditions).

PH030

PH030 Image

Cabinet Construction

  • Stainless model has stainless steel front door, and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes LED interior lighting.
  • Standard model features stainless steel door, stainless steel front, and brushed aluminum sides. Interior has anodized aluminum side walls, door liner,and back with stainless steel floor and ceiling.

Doors

  • Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,”Low-E” glass.

Insulation

  • Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam. 2″ or greater insulation thickness throughout.

Cooling System

  • Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable. Semi-Redundant cooling capability. Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH

Shelving

  • Wire shelves (3 per door) available in stanless steel, chrome plate, or PVC coated. Shelves capable of supporting up to 150 lbs of evenly distributed weight. Gray PVC coated shelves are standard.
  • Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Humidity Control

  • NIST traceable 0.8% Rotronic humidity sensor w/cert. • Solid state controlled, ultrasonic humidifier with ceramic/titanium disk for long life.

Electrical Characteristics

  • Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 outlet. A dedicated outlet is recommended. A cord and plug set to be included.
  • A sole use circuit is recommended. Unit uses approximately 4.5 amps (RLA) in operation (will vary depending on set points and ambient conditions).