Products

IN084

IN084 Image

Cabinet Construction

  • Stainless model has stainless steel front doors and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes interior lighting.
  • Standard model features stainless door, front, and brushed aluminum sides. Interior has aluminum side walls, door liner,and back with stainless steel floor and ceiling.

Doors

  • Lifetime guaranteed adjustable torsion type closure system with aluminum and stainless supports. The face of each fitted with a 12″ long recessed handle with sheet metal interlock. Handles foamed in place to insure permanent attachment. Door gasket of one piece construction. Glass door models feature double pane,”Low-E” glass. Barrel lock standard for each door. Locks keyed alike.

Lighting

  • LED interior lighting on stainless model, optional on standard model. Lights activiated by rocker switch mounted above doors.

Insulation

  • Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

Shelving

  • Wire shelves (3 per door) available in stainless steel, chrome plate, or PVC coated. Shelves capable of supporting up to 200 lbs. PVC coated shelves are standard.
  • Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Cooling System

  • Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable, and provides minimal vibration.
  • Semi-Redundant cooling capability.
  • Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH.

Electrical Characteristics

  • Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 7 RLA under test conditions.
  • A cord and plug set is included.
  • A sole use circuit is recommended.

IN084

IN084 Image

Cabinet Construction

  • Stainless model has stainless steel front doors and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes interior lighting.
  • Standard model features stainless door, front, and brushed aluminum sides. Interior has aluminum side walls, door liner,and back with stainless steel floor and ceiling.

Doors

  • Lifetime guaranteed adjustable torsion type closure system with aluminum and stainless supports. The face of each fitted with a 12″ long recessed handle with sheet metal interlock. Handles foamed in place to insure permanent attachment. Door gasket of one piece construction. Glass door models feature double pane,”Low-E” glass. Barrel lock standard for each door. Locks keyed alike.

Lighting

  • LED interior lighting on stainless model, optional on standard model. Lights activiated by rocker switch mounted above doors.

Insulation

  • Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

Shelving

  • Wire shelves (3 per door) available in stainless steel, chrome plate, or PVC coated. Shelves capable of supporting up to 200 lbs. PVC coated shelves are standard.
  • Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Cooling System

  • Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable, and provides minimal vibration.
  • Semi-Redundant cooling capability.
  • Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH.

Electrical Characteristics

  • Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 7 RLA under test conditions.
  • A cord and plug set is included.
  • A sole use circuit is recommended.