Tekhne Product Catalogue

Features:

・Wide Measurement Range at -100 to +20°Cdp
・±2 °C Accuracy
・Quick Response
・Fully calibrated at TEKHNE factory, Japan
・Price Competitiveness
・Short Delivery Time
・Enhanced Technical Support
・Traceable to NIST
・National Standard

Product Overview:

Easy
TEKHNE Corporation, a Japanese manufacturer, experienced dew point measurement over 30years,
is manufacturing innovative TK-100 series Hygrometer.
You can easily start measurement. TK-100 On-line Hygrometer offers you a complete set for continuous
measurement, including display monitor.
What you need is 100 to 240VAC power supply and sample gas connection.
Also, you can select TK-100 Dew Point Transmitter, which can be used ‘stand-alone’ basis with 4-20mA signal
output, powered by 12-28VDC.

High Quality
TEKHNE Ceramic Sensor is designed to secure the best mixture of accuracy, high response speed,
and long-term stability. Most advanced sensor technology is used for this purpose.
Also, the advanced microprocessor technology realised fully temperature compensation mechanism,
which minimises the effect by process temperature to the dew point measurement.
The -100 to +20℃ dew point output is converted to stable and linear 4-20mA output in the TK-100 Transmitter.

Flexible
TEKHNE TK-100 series are for dew point measurement in air or inert gas.
Put the sensor into your process line through 5/8″ UNF or 1/8″ NPT by using Optional sampling block.
1/8 DIN display unit can be set up to 1,000m far away from the Transmitter.
The flow rate for the process line should be 1 to 5NL/min (with optional sampling block) or 0.5 to 10m/sec (without optional sampling block), at a temperature between -20 to +60℃ and in-line pressure up to 30MPa. Filters for removing dust are always recommended.

Specifications:

• Measurement Range
  • -100 to +20°Cdp
• Accuracy
  • ±2 °Cdp
• Output
  • linear 4-20mA
• Operating Temp
  • -20 to +60°C
• Operating Pressure
  • 10-4Pa to 30MPa
• Flow Rate
  • 1 to 10 NL/min(with Sampling Block) 0.5 to 10m/sec (without Sampling Block)
• Power Supply
  • 12 to 28VDC

Features:

・Wide Measurement Range at -80 to +20°Cdp
・±2 °C Accuracy
・Quick Response
・Fully calibrated at TEKHNE factory, Japan
・Price Competitiveness
・Short Delivery Time
・Enhanced Technical Support
・Traceable to NIST
・National Standard

Product Overview:

A low cost model
TK-80 Dew Point Transmitter is a low cost model for TK-100 Dew Point Transmitter.
Narrow measurement range than TK-100 and weaker than TK-100 at operating pressure,
but it’s a low cost model.

Easy
TEKHNE Corporation, a Japanese manufacturer, experienced dew point measurement
over 30years, is manufacturing innovative TK-80 series Hygrometer.

You can easily start measurement. TK-80 On-line Hygrometer offers you a complete set for continuous measurement,
including display monitor. What you need is 100 to 240VAC power supply and sample gas connection.
Also, you can select TK-80 Dew Point Transmitter, which can be used ‘stand-alone’ basis with 4-20mA signal output, powered by 12-28VDC.

High Quality
TEKHNE Ceramic Sensor is designed to secure the best mixture of accuracy, high response speed,
and long-term stability. Most advanced sensor technology is used for this purpose.
Also, the advanced microprocessor technology realised fully temperature compensation mechanism,
which minimises the effect by process temperature to the dew point measurement. The -80 to +20℃
dew point output is converted to stable and linear 4-20mA output in the TK-80 Transmitter.

Flexible
TEKHNE TK-80 series are for dew point measurement in air or inert gas.
Put the sensor into your process line through 5/8″ UNF or 1/8″ NPT by using Optional sampling block.
1/8 DIN display unit can be set up to 1,000m far away from the Transmitter.
The flow rate for the process line should be 1 to 5NL/min (with optional sampling block) or 0.5 to
10m/sec (without optional sampling block), at a temperature between -20 to +60℃ and in-line pressure up to
30MPa. Filters for removing dust are always recommended.

Specifications:

• Measurement Range
  • -80 to +20°Cdp
• Accuracy
  • ±2 °Cdp
• Output
  • linear 4-20mA
• Operating Temp
  • -20 to +60°C
• Operating Pressure
  • 10Pa to 1MPa
• Flow Rate
  • 1 to 10 NL/min(with Sampling Block) 0.5 to 10m/sec (without Sampling Block)
• Power Supply
  • 12 to 28VDC

Features:

・Measurement Range at -100 to +20 degC
・+/- 2 degC Accuracy
・Compact Size, Light Weight
・Long Battery Life
・Easy Connection to sampling line
・Simple Operation
・Traceability to National Standard

Product Overview:

Overview
The Hygrometer TK-100 YN Model is a battery powered portable instrument.
It is suitable for the field measurements where electrical power is inconvenient or the multiple-points measurements.
TK-100 Dew Point Transmitter is set inside of the instrument for the measurement from -100 degC dp to +20 degC dp,
at an accuracy of +/- 2 degC dp.

TK-100 Transmitter
The core measurement tool for YN Model is TK-100 Dew Point Transmitter, manufactured by TEKHNE Corporation, Japan.
TEKHNE Ceramic Sensor is designed to secure the best mixture of accuracy, high response speed and long term stability.
Most advanced technology is used for this purpose. Also, the advanced microprocessor technology realized temperature
compensation mechanism, which minimizes the effect by process temperature to the dew point measurement.

Portability
YN Model is small, by 160 x 160 x 88 mm, and has lightweight, at 2 kg. It is developed based on the customers’ voice;
“easily bring it on the business trip by train or by air”.

Power
YN Model contains re-chargeable Lithium battery inside of the instrument. The battery make the instrument work for 24 hours,
by only 3 hours charge time. You can use it continuously over 24 hours, by the operation with battery charger connecting.
Battery status can be easily monitored by 3-status display for AC Power Supply, Charge and Discharge exist in the front panel.

Easy to Use
One of the most important features for such instruments is how easily users start operation.
YN Model needs only 3 steps for measurement, those are; Charge the battery, connect the line and press start button.
So the product does not choose users, but users choose the product, right now.

Specifications:

• MeasurementRange
  • -100 to +20°Cdp
• Accuracy
  • ±2 °Cdp
• Output
  • linear 4-20mA
• Operating Temp
  • 0 to +40°C
• Operating Pressure
  • Max 1MPa
• Flow Rate
  • 1 to 5 NL/min
• Power and Battery
  • AC100 to 240V, 50-60Hz Built-in rechargeable battery

Specifications:

• Measurement range
  • -100 to 20℃dp
• Accuracy
  • ±2
• Output
  • 4-20mA
• Charge time
  • 8hours
• Run time
  • 15hours
• Traceability
  • NIST

Product Overview:

Portable Hygrometer with built-in dry chamber.
Quick response time
It makes your measurement easy.